
Cáp helukabel H07BQ-F 2x1,5 mm² OG Part no. 22058/ STC Vietnam/ helukabel vietnam

Dòng cáp H07BQ-F có thể được sử dụng cho tải trọng cơ học trung bình trong môi trường khô hoặc ẩm ướt,.. để kết nối các thiết bị công nghiệp và thiết bị công nghiệp và máy sưởi, với điều kiện không có nguy cơ tiếp xúc với các bộ phận nóng hoặc do bức xạ nhiệt. Ngoài ra, cáp H07BQ-F còn được sử dụng cho các dụng cụ điện như: máy khoan, máy cưa tròn cầm tay, cũng như cho động cơ và máy móc cầm tay trong nông nghiệp tại các công trường xây dựng, bến cảng và nhà máy điện lạnh.
Technical data
EPR/PUR-insulated power cable acc. to
DIN VDE 0285-525-2-21 /
DIN EN 50525-2-21
DIN VDE 0285-525-2-21 /
DIN EN 50525-2-21
Temperature range
flexing -40°C to +80°C
fixed installation -50°C to +90°C
flexing -40°C to +80°C
fixed installation -50°C to +90°C
Permissible operating temperature
at conductor +90°C
at conductor +90°C
Nominal voltage
H05BQ-F U0/U 300/500 V
H07BQ-F U0/U 450/750 V
H05BQ-F U0/U 300/500 V
H07BQ-F U0/U 450/750 V
Test voltage
H05BQ-F 2000 V
H07BQ-F 2500 V
H05BQ-F 2000 V
H07BQ-F 2500 V
Minimum bending radius
flexing 5x cable Ø
fixed installation 3x cable Ø
flexing 5x cable Ø
fixed installation 3x cable Ø
Radiation resistance
up to 100x106 cJ/kg (up to 100 Mrad)
up to 100x106 cJ/kg (up to 100 Mrad)
Cable structure
Bare copper conductor, to DIN VDE 0295 cl.5, fine wire, BS 6360 cl.5, IEC 60228 cl.5
Core insulation of rubber compound type EI6 to DIN VDE 0207-363-1 / DIN EN 50363-1
Core identification to DIN VDE 0293-308
GN-YE conductor, 3 cores and above in the outer layer
Cores stranded in layers with optimal lay length (inner fill compound permissible *)
Outer sheath of PUR compound type TMPU to DIN EN 50363-10-2
Sheath colour: orange (RAL 2003)
Properties
Abrasion resistant
Notch resistant
Resistant to tearing and cutting
Resistant to
Oils, fats, Petrol
Water and weathering effects
Oxygene and ozone
UV-radiation, Hydrolysis and Microbial attack
Oils, fats, Petrol
Water and weathering effects
Oxygene and ozone
UV-radiation, Hydrolysis and Microbial attack
The materials used during manufacturing are cadmium-free, contain no silicone
and are free from substances harmful to the wetting properties of lacquers
and are free from substances harmful to the wetting properties of lacquers
| Part no. | No.cores x | Outer Ø | Cop. | Weight | AWG-No. |
| cross-sec. | min. - max. | weight | approx. kg / km | ||
| mm² | mm | kg / km | |||
| 22050 | 2 x 0,75 | 5,7 - 7,4 | 14,4 | 52,0 | 19 |
| 22051 | 3 G 0,75 | 6,2 - 8,1 | 21,6 | 63,0 | 19 |
| 22052 | 4 G 0,75 | 6,8 - 8,8 | 29,0 | 80,0 | 19 |
| 22053 | 5 G 0,75 | 7,6 - 9,9 | 36,0 | 96,0 | 19 |
| 22054 | 2 x 1 | 6,1 - 8,0 | 19,2 | 59,0 | 18 |
| 22055 | 3 G 1 | 6,5 - 8,5 | 29,0 | 71,0 | 18 |
| 22056 | 4 G 1 | 7,1 - 9,3 | 38,4 | 89,0 | 18 |
| 22057 | 5 G 1 | 8,0 - 10,3 | 48,0 | 112,0 | 18 |
Vui lòng liên hệ Ms. Yến - 091.663.5500 để được tư vấn và hổ trợ tốt nhất
Không có nhận xét nào:
Đăng nhận xét